轮毂电机驱动电动汽车横摆稳定性控制 

汪永嘉

控制工程 ›› 2021, Vol. 28 ›› Issue (6) : 1075-1085.

控制工程 ›› 2021, Vol. 28 ›› Issue (6) : 1075-1085.

轮毂电机驱动电动汽车横摆稳定性控制 

作者信息 +

Yaw Stability Control of Electric Vehicle Driven by Hub Motor

Author information +
文章历史 +

摘要

针对轮毂电机驱动的电动汽车的横摆稳定性问题,提出了一种基于极限学习机(ELM)网络的直接横摆力矩控制方法。采用自适应积分终端滑模(AITSM)控制策略设计横摆角速度控制器,并通过 ELM 的快速在线学习能力实现在闭环系统中进行集总干扰估计和补偿。控制器的主要贡献在于,一是实现横摆角速度跟踪误差的有限时间收敛,二是引入了 ELM 扰动估计技术,减少了传统滑模控制对系统扰动先验知识的依赖。仿真结果表明,使用所提出的控制器策略,车辆横摆角速度跟踪精度和系统强鲁棒性得到了提升,实现了更好的车辆横摆稳定性和操控性能。

Abstract

Aiming at the problem of yaw stability for electric vehicle driven by hub motor, an extreme learning machine (ELM) based direct yaw-moment control method is proposed. An adaptive integral terminal sliding mode (AITSM) control strategy is adopted to design the yaw rate controller, and the estimation and compensation of the lumped interference are realized in the closed-loop system by the fast online learning capability of ELM. The main contributions of the proposed controller include two parts. One is the realization of the finite-time convergence of the yaw velocity tracking error, the other is the introduction of ELM disturbance estimation mechanism, which reduces the dependence of the traditional sliding mode control on the prior knowledge of system disturbance. The simulation results show that with the proposed control strategy, the tracking acuracy of the yaw rate and the robustness of the system are significantly improved so that better yaw stability and maneuverability for vehicles can be obtained.

关键词

电动汽车 / 积分终端滑模 / 极限学习机

Key words

Electric vehicle / integral terminal sliding mode / extreme learning machine (ELM)

引用本文

导出引用
汪永嘉. 轮毂电机驱动电动汽车横摆稳定性控制 [J]. 控制工程, 2021, 28(6): 1075-1085
WANG Yong-jia. Yaw Stability Control of Electric Vehicle Driven by Hub Motor[J]. Control Engineering of China, 2021, 28(6): 1075-1085

4

Accesses

0

Citation

Detail

段落导航
相关文章

/